{"title":"Stand Up Pouches","description":null,"products":[{"product_id":"kp-eco-001","title":"Mono-PE Single-Stream Stand-Up Doypack","description":"\u003cp\u003eThis doypack strips the pack back to one polymer family. The body, the sealant and the zipper are specified as PE so a store drop-off route stays theoretically open, and the construction avoids foil and metallic ink that would rule it out.\u003c\/p\u003e\n\u003cp\u003eA K-seal bottom gusset gives a stable oval base that stands on shelf and holds its shape while the customer scoops, and the zipper sits low enough to keep a full fill below the top seal. The matte surface and open front panel leave clean room for a buyer's own brand label without any brand of ours on the pack.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Stand-up doypack, mono-material PE direction, bottom gusset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Press-to-close zipper below the top seal plus easy-tear notch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-PE, MDO-PE or PCR-blend PE options - layer set not yet fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 110-125 microns total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 3 lb \/ 6 lb \/ 12 lb filled capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic, up to 8 stations, water-based inks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body, low-gloss sealant band, no foil or metallic ink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None by default; PE window option (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None by default; die-cut handle option on 6 lb \/ 12 lb, (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None by default; mono-material valve option (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecycled content:\u003c\/strong\u003e PCR direction only - percentage to be confirmed, not certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 10-15 business days; mass production: 25-35 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707651395887,"sku":"KP-ECO-001-2500","price":790.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-ECO-001-1.webp?v=1789837718"},{"product_id":"kp-eco-004","title":"Bio-Based Mono-PE Valve Pouch for Raw and Freeze-Dried Food","description":"\u003cp\u003eRaw and high-fat pet food releases gas, and this pouch is built around that problem. A one-way degassing valve sits on a reinforced patch and lets pressure escape without letting air back in, which keeps the product stable and the pack flat on the shelf.\u003c\/p\u003e\n\u003cp\u003eThe film and sealant are specified in a bio-based PE direction so the structure stays mono-material, and foil and metallic inks are excluded for the same reason. A low-set zipper keeps a full fill below the seal so the pouch still reseals cleanly after opening.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Stand-up pouch, bio-based mono-PE direction, valve and bottom gusset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Press-to-close zipper below the top seal, easy-tear notch, one-way degassing valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Bio-based PE film and sealant with a high-barrier coating option - grade not fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 115-135 microns excluding the valve body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 4 oz \/ 12 oz \/ 2 lb filled capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic, up to 8 stations, water-based inks, masked valve zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte soft-touch, no foil or metallic ink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None by default; special request only, (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Not offered on this format\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e One-way degassing valve with reinforcing patch; valve material family (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBio-based content:\u003c\/strong\u003e To be confirmed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU ; 3,000 pcs (4 oz trial)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 14-20 business days; mass production: 28-40 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works pricing to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707651297583,"sku":"KP-ECO-004-2500","price":1386.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-ECO-004-1_4b04b236-cfda-48e7-a390-45ef1e8b0c65.webp?v=1789837721"},{"product_id":"kp-eco-005","title":"Mono-PP Spout Pouch for Wet Food and Gravy Toppers","description":"\u003cp\u003eWet food needs a pack that can be squeezed clean and closed again without a bowl of leftovers. This pouch is built around a welded screw-cap spout with a tamper-evident ring, sized in three steps from a single-serve 80 g to a 250 g multi-serve.\u003c\/p\u003e\n\u003cp\u003eThe body is specified in a PP direction so the film and the spout share one polymer family, and the front panel is left unprinted in a clear zone so the fill reads through. The matte band keeps the pack from looking like a generic juice pouch on the shelf.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Stand-up spout pouch, mono-PP direction, welded fitment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Screw-cap spout with tamper-evident ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e BOPP over cast PP sealant with a PP fitment, or a retort-capable PP\/PP structure - not fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 100-120 microns excluding the fitment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 80 g \/ 150 g \/ 250 g filled capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic, up to 8 stations, water-based inks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss body with a matte band; no foil or metallised layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e Clear unprinted front zone - to be confirmed against the mono-PP build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Not applicable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e Welded screw-cap spout; sizes and cap colour (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhole-pack material claim:\u003c\/strong\u003e Pending verification of the spout fitment - not claimed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 10,000 pcs \/ SKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 12-18 business days; mass production: 25-35 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works pricing to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707651264815,"sku":"KP-ECO-005-2500","price":646.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-ECO-005-1.webp?v=1789837722"},{"product_id":"kp-eco-010","title":"Slider-Zip Pour-Spout Refill Kibble Pouch","description":"\u003cp\u003eRefill formats only work if they are easier to use than the container they replace. This pouch answers with two openings: a wide slider zipper across the top for pouring in a full refill or scooping out a portion, and a welded pour spout on the shoulder for serving straight into a bowl.\u003c\/p\u003e\n\u003cp\u003eA soft side-loop handle takes the strain of a 20 lb fill, and an anti-sift fold at the bottom keeps fine powder from settling into the seal. The structure is kept to a single PE family so the body and the closure components can be assessed together, and the front panel is left blank for the buyer's brand.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Stand-up refill pouch with slider zipper, pour spout, bottom gusset and side-loop handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Slider zipper track plus a pour spout with a hinged flip cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e MDO-PE over PE sealant with PE-family closures, optional 30% PCR direction - not fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 125-150 microns excluding fitments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 8 lb \/ 15 lb \/ 20 lb filled capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic, up to 8 stations, water-based inks, masked weld zones\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body with scuff-resistant shoulder and handle zones\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e Not offered on this SKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Soft side-loop carry handle welded to the body (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e Pour spout with hinged flip cap; diameter and cap type (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhole-pack claim:\u003c\/strong\u003e Pending assessment of slider, spout and handle - not claimed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 3,000 pcs \/ SKU for this large format with two closure components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 15-22 business days; mass production: 30-40 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works pricing to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707651035439,"sku":"KP-ECO-010-2500","price":1947.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-ECO-010-1.webp?v=1789837726"},{"product_id":"kp-pf-001","title":"KindPack Trailhead Stand-Up Doypack","description":"\u003cp\u003eThe Trailhead is the everyday flagship of the KindPack kibble line. A single bottom fold gusset lets the pouch open into a stable oval base, so it stands on the shelf, survives the shipping box, and holds its shape when the customer reaches in with a scoop.\u003c\/p\u003e\n\u003cp\u003eThe zipper sits low enough to keep a full 8 lb fill below the seal, and the tear notch gives a clean opening without scissors. Matte soft-touch film with a spot-gloss logo block reads premium on a crowded pet aisle, while the opaque body protects fats and aromatics from light.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today.\u003c\/p\u003e\n\u003cp\u003eBefore any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Stand-Up Doypack with Bottom Gusset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Stand-Up Doypack with Bottom Gusset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Press-to-close zipper below top seal, with easy-tear notch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-material PE, single-stream film direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 110-130 micron total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 2 lb \/ 4 lb \/ 8 lb (907 g \/ 1.8 kg \/ 3.6 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 2 lb \/ 4 lb \/ 8 lb (907 g \/ 1.8 kg \/ 3.6 kg). Finished size W x H + bottom gusset (mm): 2 lb approx. 200 x 310 + 70; 4 lb approx. 240 x 380 + 80; 8 lb approx. 290 x 440 + 95.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 10-15 business days; mass production: 25-35 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707651002671,"sku":"KP-PF-001-2500","price":688.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-001-1.webp?v=1789837727"},{"product_id":"kp-pf-002","title":"KindPack SnapTab Pull-Zipper Pouch","description":"\u003cp\u003eSnapTab answers the most common cat-owner complaint about resealable bags: fiddly zipper starts. A molded pull-tab zipper profile opens with one pull and closes with a simple press, which keeps the reorder rate high and the aroma complaints low.\u003c\/p\u003e\n\u003cp\u003eThe deep indigo body with a cold-foil constellation pattern signals a nighttime cat-care positioning, and the matte varnish band gives a soft hand-feel against the gloss body. Sized for 1 lb trial through 6 lb household formats.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today.\u003c\/p\u003e\n\u003cp\u003eBefore any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pull-Tab Zipper Stand-Up Pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Pull-Tab Zipper Stand-Up Pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Integral pull-tab slider-free zipper that opens with a single pull and re-closes by pressing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-material PE, single-stream film direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 110-135 micron total at the body, higher at the zipper weld zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 1 lb \/ 3 lb \/ 6 lb (454 g \/ 1.36 kg \/ 2.7 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 1 lb \/ 3 lb \/ 6 lb (454 g \/ 1.36 kg \/ 2.7 kg). Finished size W x H + bottom gusset (mm): 1 lb approx. 180 x 270 + 60; 3 lb approx. 230 x 340 + 75; 6 lb approx. 270 x 410 + 90.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 12-18 business days; mass production: 30-45 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707650969903,"sku":"KP-PF-002-2500","price":799.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-002-1.webp?v=1789837728"},{"product_id":"kp-pf-009","title":"KindPack LoopCycle Mono-Material Pouch","description":"\u003cp\u003eLoopCycle replaces the usual mixed laminate with a same-family polymer build, so the pouch body and zipper do not need to be separated before disposal. The front panel includes a dedicated recycling-education icon block that walks the customer through store drop-off habits, which is what most North American retailers ask for in a packaging scorecard submission.\u003c\/p\u003e\n\u003cp\u003eGeometric prism graphics keep an eco story looking modern rather than rustic. Any recyclability claim is subject to confirmation before it appears on pack.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today.\u003c\/p\u003e\n\u003cp\u003eBefore any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Recyclable-Direction Mono-Material Stand-Up Pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Recyclable-Direction Mono-Material Stand-Up Pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Press-to-close mono-compatible zipper and easy-tear notch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-material PE, single-stream film direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 105-135 micron total for mono-PE; 80-110 micron if mono-PP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 1 lb \/ 3 lb \/ 6 lb \/ 12 lb (454 g \/ 1.36 kg \/ 2.7 kg \/ 5.4 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 1 lb \/ 3 lb \/ 6 lb \/ 12 lb (454 g \/ 1.36 kg \/ 2.7 kg \/ 5.4 kg). Finished size W x H + bottom gusset (mm): 1 lb approx. 180 x 280 + 65; 3 lb approx. 230 x 350 + 80; 6 lb approx. 270 x 410 + 90; 12 lb approx. 310 x 470 + 105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 12-18 business days; mass production: 30-45 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707650740527,"sku":"KP-PF-009-2500","price":884.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-009-1_4201daf8-da56-4b89-8246-63886945bf72.webp?v=1789837734"},{"product_id":"kp-pf-015","title":"KindPack SoilKind Compostable Pouch","description":"\u003cp\u003eSoilKind gives a natural-channel brand a pouch built on plant-based materials instead of a conventional film sandwich. The paper-look exterior carries delicate botanical line art, and the matte surface avoids the plasticky sheen that undercuts a compostability story.\u003c\/p\u003e\n\u003cp\u003eA bottom gusset keeps 1 lb fills standing in the pantry. Because compostability claims are regulated differently across US states and Canadian provinces, KindPack treats any certification wording as a to-be-confirmed item resolved before artwork is finalized.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED - HIGHEST RISK SKU IN THIS SET. No compostability, biodegradability, plant-based content or recyclability claim is validated, and none may be made.\u003c\/p\u003e\n\u003cp\u003eThis SKU must NOT be sold or listed with words such as 'compostable', 'biodegradable', 'home compostable', 'zero waste' or 'plastic free' until all of the following are on file: a specific end-of-life standard test report for the finished pack from an accredited laboratory; a statement of the disposal conditions the pack actually requires; clarity on whether those conditions exist in the target US and Canadian markets; confirmation that the zipper, any adhesive and the ink do not disqualify the pack; and a legal review of the resulting wording. Until then the only permitted description is 'plant-derived film direction under development - no end-of-life claim, disposal route to be confirmed'.\u003c\/p\u003e\n\u003cp\u003eIf the test results do not support a claim, this SKU ships as a standard film pouch with no green wording. Duties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Compostable-Direction Plant-Based Stand-Up Pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Compostable-Direction Plant-Based Stand-Up Pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Compostable press-to-close strip with an easy-tear notch and a paper top fold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Plant-film composition held as a compostability direction only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 110-150 micron total as a paper\/plant-film equivalent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 4 oz \/ 8 oz \/ 1 lb (113 g \/ 227 g \/ 454 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 4 oz \/ 8 oz \/ 1 lb (113 g \/ 227 g \/ 454 g). Finished size W x H + bottom gusset (mm): 4 oz approx. 130 x 200 + 50; 8 oz approx. 160 x 240 + 60; 1 lb approx. 190 x 280 + 70.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 6 stations, with inks selected for compatibility with the plant-based film - ink system (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte finish with a natural hand feel; no foil, no metallic ink and no coating that would interfere with the intended end-of-life route\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None. A window would add a second material to a pack whose entire purpose is a single end-of-life route - not offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None. Not applicable to this retail format\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None. No valve and no spout; dry treats only. Any valve would have to be plant-derived and is not available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 15-20 business days; mass production: 35-50 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707650543919,"sku":"KP-PF-015-2500","price":884.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-015-1_effb77ee-eee8-43f1-b4f9-a24e73d7a055.webp?v=1789837740"},{"product_id":"kp-pf-018","title":"KindPack RefillSnip Doypack","description":"\u003cp\u003e\u003cem\u003eSlim refill pouch with a snip-and-pour corner that empties cleanly into reusable pet food bins. Rebuilt into the KP-ECO-010 Slider-Zip Pour-Spout Refill Kibble Pouch green parameter family: refill-format direction with a mono-PE body and matched-polymer closure parts. Blank front panel, no brand on the pack. All specifications are Draft \/ Indicative \/ To Confirm - not a quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eSpecification\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eBag type\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eGreen \u0026amp; Recyclable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eStructure\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eSlim refill Doypack with a tapered pour corner and a bottom gusset; designed to sit inside a standard 1.5-gallon pet bin Re-homed to the KP-ECO-010 Slider-Zip Pour-Spout Refill Kibble Pouch build direction: Stand-up refill pouch with a slider zipper track and a welded pour-spout fitment, a reinforced bottom gusset, an inner anti-sift fold at the bottom, and a soft side-loop carry handle welded to the body (Draft \/ To Confirm).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eDRAFT \/ TO CONFIRM - KP-ECO-010 family material direction: DRAFT \/ TO CONFIRM - mono-material PE direction so the body, the slider zipper and the spout fitment can be evaluated as one stream. Sample candidates: (a) MDO-PE 25 micron \/ water-based ink \/ PE sealant 100-120 micron with a PE slider track and a PE-compatible spout fitment; (b) the same structure with a 30% PCR direction in the sealant layer. Slider track grade, spout fitment polymer, PCR share and the overall material compatibility of the closures are UNVERIFIED and must be confirmed by testing - not a confirmed specification. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: lightweight mono-PE direction for material reduction, or a standard PET\/PE laminate where longer pantry life is required. Recyclability wording must be confirmed before use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eTotal thickness\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e90-120 micron total (Draft \/ To Confirm) - family reference for KP-ECO-010: 125-150 microns total, excluding the spout fitment and slider (Draft \/ To Confirm) - Draft \/ To Confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eClosure\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eSnip-and-pour corner seal, with an optional resealable press-to-close strip for partial pours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003ePrint process\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eFlexographic surface print, up to 8 stations, water-based inks, with masked weld zones reserved for the spout fitment, the slider track and the handle patch (Draft \/ To Confirm) Applied to this SKU's Refill Doypack with Snip-Corner Pour Spout format.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eMatte body with a scuff-resistant topcoat direction on the shoulder and handle zones; no foil, no metallic ink Original catalogue surface direction to confirm: Matte surface with high-contrast block-color graphics and a printed fill-guide line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eWindow\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eNone. Neither a window patch nor a clear zone is offered, because the slider track, the spout fitment and the handle already introduce closure components into the structure Format note for KP-PF-018: Snip or pour opening plus reclose zipper are the primary closures; no separate window option in the default build.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eHandle\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eSoft side-loop carry handle welded to the body, matched to the same PE family - To Confirm for load and weld strength at the 20 lb fill Format note for KP-PF-018: Snip or pour opening plus reclose zipper are the primary closures; no separate window option in the default build.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eDegassing valve\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003ePour spout with a hinged flip cap, welded to the upper-right shoulder; spout diameter and cap type To Confirm. No degassing valve on this SKU Format note for KP-PF-018: Snip or pour opening plus reclose zipper are the primary closures; no separate window option in the default build.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eOrigin\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eDongguan, Guangdong, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eSizes \u0026amp; fill weight\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eAvailable sizes\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e1 lb \/ 2 lb \/ 4 lb (454 g \/ 907 g \/ 1.8 kg) - Draft \/ To Confirm against fill weight and bulk density\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eDimensions (W x H + gusset)\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e1 lb \/ 2 lb \/ 4 lb (454 g \/ 907 g \/ 1.8 kg). Draft finished size W x H + bottom gusset (mm): 1 lb approx. 150 x 260 + 60; 2 lb approx. 190 x 300 + 70; 4 lb approx. 230 x 350 + 80. Draft slim profile intended to sit inside a standard 1.5 gallon pet bin. Draft \/ To Confirm against the target bin.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eMonthly capacity\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e800,000-2,000,000 pcs \/ month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp style=\"font-size:13px;color:#5A6472;margin:6px 0 0\"\u003eBags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eMOQ \u0026amp; unit pricing\u003c\/h3\u003e\u003cp style=\"margin:0 0 10px\"\u003e500 pcs (digital print) \/ 20,000 pcs (gravure)\u003c\/p\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e500 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.277 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e1,000 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.249 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e5,000 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.139 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e20,000 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.104 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp style=\"font-size:13px;color:#5A6472;margin:6px 0 0\"\u003ePrices are FOB Dongguan and exclude duties and taxes.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eLead time \u0026amp; payment\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eProduction lead time\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e25-35 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eSample lead time\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e10-15 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003ePayment terms\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eT\/T - 40% deposit, balance before shipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eDocumentation supplied\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eFood-contact documentation\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eFood-contact compliance letters for the PE film, the slider track, the spout fitment and the handle patch - TO REQUEST | Declaration of Compliance covering film, slider, spout, cap, handle and printing ink - TO PREPARE | Migration test report including the slider channel, the spout weld and the cap seal - TO REQUEST | Slider zipper cycle test (open \/ close cycles) and pull-strength report - TO PREPARE | Spout weld strength, burst pressure and leak test report at fill weight - TO PREPARE | Handle weld load test at the 20 lb fill and drop test from handling height - TO PREPARE | Anti-sift fold performance and fine-powder retention test - TO PREPARE | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | PCR feedstock and food-contact suitability documentation if recycled content is used - TO REQUEST | Food-contact declaration for this SKU's closure and fitment components (Snip-and-pour corner seal, with an optional resealable press-to-close strip for partial po) - TO REQUEST from the component supplier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eEnvironmental claim status\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eCLAIM PENDING - NOT VERIFIED. This SKU carries the highest number of non-film components in the set - a slider track, a spout fitment and a handle patch - so any mono-material or recyclability claim requires all three components to be assessed together with the body, not just the film. Slider track grade, spout polymer, handle weld material, PCR content and recovery eligibility are all unverified. Until documentation and an assessment are on file, the only permitted wording is 'mono-material PE direction with matched closure components - whole-pack claim under verification'. SKU note for KP-PF-018: the claim-critical components are the closure and fitment actually used on this build (Snip-and-pour corner seal, with an optional resealable press-to-close strip for partial pours) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eAbout this structure\u003c\/h3\u003e\u003cp\u003eRefillSnip is designed for the refill moment. Cut the marked corner and the tapered pour mouth empties into a standard pet bin without spilling a trail of kibble across the kitchen floor. The slim body cuts material and freight per pound of food, which is exactly what refill buyers are looking for. Apothecary-style graphics signal a considered, poultice-and-herbs heritage, and the printed fill-guide line tells the customer when the reusable bin is at the correct level. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-010 - Slider-Zip Pour-Spout Refill Kibble Pouch - on the basis of structure-first match: refill doypack with a pourable opening and a reclose zipper. The family design direction is: Specify the body film, the slider track, the spout fitment and the handle patch in one polymer family so a whole-pack claim is at least theoretically possible; keep the ink water-based and foil-free; use the slider as the refill path so the pouch can replace a rigid hopper or an outer carton rather than adding to it; and treat source reduction by downgauging the body film as the safest verified saving, since it can be quantified by mass comparison. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. This SKU carries the highest number of non-film components in the set - a slider track, a spout fitment and a handle patch - so any mono-material or recyclability claim requires all three components to be assessed together with the body, not just the film. Slider track grade, spout polymer, handle weld material, PCR content and recovery eligibility are all unverified. Until documentation and an assessment are on file, the only permitted wording is 'mono-material PE direction with matched closure components - whole-pack claim under verification'. Duties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eWhy brands choose it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRefill Station - large format handling with two openings - applied to the Refill Doypack with Snip-Corner Pour Spout format\u003c\/li\u003e\n\u003cli\u003eSlider-Zip Pour-Spout Refill Kibble Pouch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eFrequently asked\u003c\/h3\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eIs your company a manufacturer or a trading company?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eCan your packaging be customized?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. We provide full OEM\/ODM services including custom printing, size, material structure, pouch type, zipper \/ spout \/ handle options, and artwork support.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eWhat types of packaging bags can you produce?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eHow do I request a quotation?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eHow can I contact you?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUse the inquiry form on this page, email us, or reach us via WhatsApp \/ WeChat. A dedicated project manager will follow up within one business day.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eNeed this quoted?\u003c\/h3\u003e\u003cp\u003eSend your fill weight, first-run quantity and target market to \u003cstrong\u003ekindpackpouch@gmail.com\u003c\/strong\u003e or WhatsApp \u003cstrong\u003e+86 150 1487 8185\u003c\/strong\u003e. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.\u003c\/p\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707650445615,"sku":"KP-PF-018-2500","price":501.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-018-1_b79c0edc-46da-404f-bb5a-d8e46471f7e6.webp?v=1789837743"},{"product_id":"kp-pf-025","title":"KindPack FreshVent Valve Pouch","description":"\u003cp\u003e\u003cem\u003eStand-up pouch with a one-way valve that lets product gas escape while keeping oxygen out. Rebuilt into the KP-ECO-004 Bio-Based Mono-PE Valve Pouch for Raw and Freeze-Dried Food green parameter family: bio-based mono-PE with a valve and high-barrier direction. Blank front panel, no brand on the pack. All specifications are Draft \/ Indicative \/ To Confirm - not a quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eSpecification\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eBag type\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eGreen \u0026amp; Recyclable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eStructure\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eStand-up pouch with a welded degassing valve and a bottom gusset; valve placement is defined to avoid obstruction during scooping Re-homed to the KP-ECO-004 Bio-Based Mono-PE Valve Pouch for Raw and Freeze-Dried Food build direction: Stand-up pouch with a welded or rivet-fitted one-way degassing valve, reinforced valve patch inside the film, bottom gusset and a double-seal top (Draft \/ To Confirm).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eDRAFT \/ TO CONFIRM - KP-ECO-004 family material direction: DRAFT \/ TO CONFIRM - bio-based mono-PE direction. Sample candidates: (a) bio-based PE (sugarcane-derived) MDO web 25 micron \/ water-based ink \/ bio-based PE sealant 90-100 micron; (b) bio-based PE blend with an EVOH-free high-barrier coating for the raw food application. Bio-based carbon share, barrier performance and the valve's material family are unverified and must be tested; the whole-pack material balance depends on the valve selection. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: high-barrier laminate with a valve selected for the expected gas release rate; valve behavior should be validated against the specific product's outgassing pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eTotal thickness\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e115-145 micron total (Draft \/ To Confirm; valve weld zone locally reinforced) - family reference for KP-ECO-004: 115-135 microns total, excluding the valve body (Draft \/ To Confirm) - Draft \/ To Confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eClosure\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003ePress-to-close zipper with a welded one-way valve near the top seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003ePrint process\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eFlexographic surface print, up to 8 stations, water-based inks, with a masked area reserved for the valve weld (Draft \/ To Confirm) Applied to this SKU's Stand-Up Pouch with One-Way Degassing Valve format.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eMatte finish with a soft-touch hand feel; no foil and no metallic ink so the mono-material direction is preserved Original catalogue surface direction to confirm: Matte surface with a gloss ring detail printed around the valve position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eWindow\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eNone in the default build. A mono-material PE window is theoretically possible but the valve placement and the barrier requirement make it a To Confirm special request only Format note for KP-PF-025: One-way degassing valve is the primary closure and its body must be matched to the family material direction.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eHandle\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eNone. Not offered on this retail-size format Format note for KP-PF-025: One-way degassing valve is the primary closure and its body must be matched to the family material direction.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eDegassing valve\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eOne-way degassing valve, welded or rivet-fitted, with a reinforcing patch; valve body material and recyclability compatibility To Confirm. No drinking or pouring spout is offered Format note for KP-PF-025: One-way degassing valve is the primary closure and its body must be matched to the family material direction.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eOrigin\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eDongguan, Guangdong, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eSizes \u0026amp; fill weight\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eAvailable sizes\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e1 lb \/ 2 lb \/ 5 lb (454 g \/ 907 g \/ 2.3 kg) - Draft \/ To Confirm against fill weight and bulk density\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eDimensions (W x H + gusset)\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e1 lb \/ 2 lb \/ 5 lb (454 g \/ 907 g \/ 2.3 kg). Draft finished size W x H + bottom gusset (mm): 1 lb approx. 190 x 290 + 70; 2 lb approx. 230 x 340 + 80; 5 lb approx. 270 x 400 + 95. Draft valve position on the upper front panel, clear of the scooping path. Draft \/ To Confirm by gas-release trial.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eMonthly capacity\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e500,000-1,200,000 pcs \/ month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp style=\"font-size:13px;color:#5A6472;margin:6px 0 0\"\u003eBags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eMOQ \u0026amp; unit pricing\u003c\/h3\u003e\u003cp style=\"margin:0 0 10px\"\u003e500 pcs (digital print) \/ 20,000 pcs (gravure)\u003c\/p\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e500 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.485 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e1,000 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.436 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e5,000 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.242 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003e20,000 pcs\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eUSD 0.182 \/ pc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp style=\"font-size:13px;color:#5A6472;margin:6px 0 0\"\u003ePrices are FOB Dongguan and exclude duties and taxes.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eLead time \u0026amp; payment\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eProduction lead time\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e32-48 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eSample lead time\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003e15-20 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003ePayment terms\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eT\/T - 40% deposit, balance before shipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eDocumentation supplied\u003c\/h3\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eFood-contact documentation\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eFood-contact compliance letter for the bio-based PE film and sealant - TO REQUEST | Bio-based carbon content verification (for example a C14-based test report) - TO REQUEST | Declaration of Compliance covering film, valve and printing ink - TO PREPARE | Migration test report with attention to the valve weld area - TO REQUEST | Valve supplier food-contact statement and air-tightness \/ reverse-flow test report - TO REQUEST | Shelf-life and oxygen \/ moisture ingress study for the raw food application - TO PREPARE | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | Valve weld strength and drop test report at fill weight - TO PREPARE | Food-contact declaration for this SKU's closure and fitment components (Press-to-close zipper with a welded one-way valve near the top seal) - TO REQUEST from the component supplier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;color:#5A6472;width:38%;vertical-align:top\"\u003eEnvironmental claim status\u003c\/td\u003e\n\u003ctd style=\"padding:7px 10px;border-bottom:1px solid #E3E8E3;vertical-align:top\"\u003eCLAIM PENDING - NOT VERIFIED. No bio-based content, recyclability, mass-balance, compostability or carbon claim is validated for this SKU. Bio-based share of the total pack, the bio-carbon content of the film, the effect of the valve body on any recovery route, and any mass-balance model are all unverified. Until declarations and an independent assessment are on file, the only permitted wording is 'bio-based PE direction - content and claim status under verification'. SKU note for KP-PF-025: the claim-critical components are the closure and fitment actually used on this build (Press-to-close zipper with a welded one-way valve near the top seal) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eAbout this structure\u003c\/h3\u003e\u003cp\u003eFreshVent exists because some products keep working after they are packed. A welded one-way valve releases carbon dioxide produced by fermentation or fresh processing, so the pouch does not swell into a pillow that distorts the print and consumes pallet space. Meanwhile the valve blocks outside oxygen, protecting aroma and fats. A gloss ring printed around the valve turns an engineering detail into a visible freshness cue, and desert canyon graphics suit earthy, craft-processed product lines. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-004 - Bio-Based Mono-PE Valve Pouch for Raw and Freeze-Dried Food - on the basis of exact structural match: stand-up pouch with a one-way degassing valve. The family design direction is: Use a plant-based PE direction for the film and sealant so the structure stays in one polymer family; keep the valve as the only non-film component and specify it in a compatible material; water-based inks; solvent-free lamination; and avoid foil and metallised coatings that would rule the pack out of a film recovery route. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No bio-based content, recyclability, mass-balance, compostability or carbon claim is validated for this SKU. Bio-based share of the total pack, the bio-carbon content of the film, the effect of the valve body on any recovery route, and any mass-balance model are all unverified. Until declarations and an independent assessment are on file, the only permitted wording is 'bio-based PE direction - content and claim status under verification'. Duties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eWhy brands choose it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSlow Release - valve technology on a plant-based film, quiet studio light - applied to the Stand-Up Pouch with One-Way Degassing Valve format\u003c\/li\u003e\n\u003cli\u003eBio-Based Mono-PE Valve Pouch for Raw and Freeze-Dried Food\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eFrequently asked\u003c\/h3\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eIs your company a manufacturer or a trading company?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eCan your packaging be customized?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. We provide full OEM\/ODM services including custom printing, size, material structure, pouch type, zipper \/ spout \/ handle options, and artwork support.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eWhat types of packaging bags can you produce?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eHow do I request a quotation?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.\u003c\/p\u003e\u003cp style=\"margin:16px 0 4px\"\u003e\u003cstrong\u003eHow can I contact you?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUse the inquiry form on this page, email us, or reach us via WhatsApp \/ WeChat. A dedicated project manager will follow up within one business day.\u003c\/p\u003e\u003ch3 style=\"font-size:16px;margin:26px 0 10px\"\u003eNeed this quoted?\u003c\/h3\u003e\u003cp\u003eSend your fill weight, first-run quantity and target market to \u003cstrong\u003ekindpackpouch@gmail.com\u003c\/strong\u003e or WhatsApp \u003cstrong\u003e+86 150 1487 8185\u003c\/strong\u003e. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.\u003c\/p\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707650216239,"sku":"KP-PF-025-2500","price":884.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-025-1.webp?v=1789837749"},{"product_id":"kp-pf-026","title":"KindPack ReGrip Loop Pouch","description":"\u003cp\u003eReGrip replaces the zipper track with a wide fold-and-press closure strip. There is nothing to align, so it closes correctly every time, and it stays visibly open or closed at a glance, which solves two chronic complaints about conventional resealable pouches.\u003c\/p\u003e\n\u003cp\u003eThe doubled top flange is engineered so the strip is welded rather than glued, and the fabric-textured band makes the closure easy to find by touch. Origami-fold graphics echo the folding gesture in the design itself.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today.\u003c\/p\u003e\n\u003cp\u003eBefore any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Stand-Up Pouch with Reusable Hook-and-Loop Closure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Stand-Up Pouch with Reusable Hook-and-Loop Closure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Wide hook-and-loop closure strip that folds over and presses shut, plus a tear notch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-material PE, single-stream film direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 115-145 micron total at the body; doubled flange zone approx. 230-290 micron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 2 lb \/ 4 lb \/ 8 lb (907 g \/ 1.8 kg \/ 3.6 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 2 lb \/ 4 lb \/ 8 lb (907 g \/ 1.8 kg \/ 3.6 kg). Finished size W x H + bottom gusset (mm): 2 lb approx. 210 x 320 + 70; 4 lb approx. 250 x 380 + 85; 8 lb approx. 290 x 440 + 95, all with a doubled top flange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 15-20 business days; mass production: 32-48 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707650183471,"sku":"KP-PF-026-2500","price":1063.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-026-1_a51047d1-858d-4f25-8253-9b77c88aafda.webp?v=1789837750"},{"product_id":"kp-pf-029","title":"KindPack BaseView Barrier Pouch","description":"\u003cp\u003eBaseView puts transparency where it costs nothing. The front panel stays fully opaque for barrier protection and brand storytelling, while the bottom gusset is produced in a high-clarity film so the actual kibble or mixer blend is visible where the pouch stands on shelf.\u003c\/p\u003e\n\u003cp\u003eIt is a product-proof cue without sacrificing the light protection that fats need. A warm photographic portrait panel reinforces a personal, single-name brand story for regional and DTC makers.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today.\u003c\/p\u003e\n\u003cp\u003eBefore any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Barrier Stand-Up Pouch with Clear Bottom Gusset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Barrier Stand-Up Pouch with Clear Bottom Gusset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Press-to-close zipper with an easy-tear notch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-material PE, single-stream film direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 115-145 micron total at the body; clear gusset film 70-100 micron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 2 lb \/ 5 lb \/ 10 lb (907 g \/ 2.3 kg \/ 4.5 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 2 lb \/ 5 lb \/ 10 lb (907 g \/ 2.3 kg \/ 4.5 kg). Finished size W x H + bottom gusset (mm): 2 lb approx. 200 x 310 + 70; 5 lb approx. 250 x 380 + 85; 10 lb approx. 290 x 440 + 100.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 15-20 business days; mass production: 32-48 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707650085167,"sku":"KP-PF-029-2500","price":833.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-029-1_decb041d-76c5-4445-9820-3f405e3e8137.webp?v=1789837753"},{"product_id":"kp-pf-032","title":"KindPack MeasureCap Doypack","description":"\u003cp\u003eMeasureCap builds the scoop into the closure. A graduated screw-on cap measures the dose, then screws back onto the spout so it never disappears into the powder.\u003c\/p\u003e\n\u003cp\u003eThat matters for milk replacer and supplements where an inaccurate scoop affects outcomes and triggers complaints. A rigid spout collar handles the repeated twisting of daily use, and the high-barrier body protects hygroscopic powders from clumping.\u003c\/p\u003e\n\u003cp\u003eA digital gradient mesh gives a measured, formulation-forward tone for veterinary-channel products. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED.\u003c\/p\u003e\n\u003cp\u003eNo recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole.\u003c\/p\u003e\n\u003cp\u003eHot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Stand-Up Pouch with Integrated Measuring-Cap Pour Spout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Stand-Up Pouch with Integrated Measuring-Cap Pour Spout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Wide-mouth spout with a graduated screw-on measuring cap that doubles as a scoop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-material PP spout-pouch direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 115-150 micron total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 500 g \/ 1 kg \/ 2 kg (17.6 oz \/ 2.2 lb \/ 4.4 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 500 g \/ 1 kg \/ 2 kg (17.6 oz \/ 2.2 lb \/ 4.4 lb). Finished size W x H + bottom gusset (mm): 500 g approx. 180 x 270 + 65; 1 kg approx. 230 x 330 + 75; 2 kg approx. 270 x 390 + 90.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is to be confirmed against the mono-PP build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None. Not applicable to this retail format\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 15-20 business days; mass production: 32-48 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707649954095,"sku":"KP-PF-032-2500","price":1530.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-032-1_64a2a5cf-60d2-4a32-bf93-f8363fdc4015.webp?v=1789837756"},{"product_id":"kp-pf-033","title":"KindPack MailerDoy Subscription Pouch","description":"\u003cp\u003eMailerDoy separates two jobs that usually get merged. The outer tear strip opens the shipping parcel cleanly, and an inner zipper handles pantry resealing, so the customer is not cutting into the food pack with scissors or tearing the closure track.\u003c\/p\u003e\n\u003cp\u003eThe slim format is sized to parcel cube to reduce dimensional-weight charges, and the matte surface resists scuffing and adhesive label marking in transit. Street-art stencil graphics make the unboxing moment feel like part of the brand.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today.\u003c\/p\u003e\n\u003cp\u003eBefore any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Subscription Mailer Doypack with Tear-Strip Zipper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Subscription Mailer Doypack with Tear-Strip Zipper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Integrated tear strip for parcel opening plus a press-to-close zipper underneath for pantry resealing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Mono-material PE, single-stream film direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 110-145 micron total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 1 lb \/ 2 lb \/ 3 lb (454 g \/ 907 g \/ 1.36 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 1 lb \/ 2 lb \/ 3 lb (454 g \/ 907 g \/ 1.36 kg). Finished size W x H + bottom gusset (mm): 1 lb approx. 170 x 260 + 60; 2 lb approx. 200 x 300 + 70; 3 lb approx. 230 x 330 + 80, sized to a parcel cube footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 5,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 12-18 business days; mass production: 30-42 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707649921327,"sku":"KP-PF-033-2500","price":620.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-033-1_2dd67534-e676-40f2-8418-7d5ad2c894c3.webp?v=1789837757"},{"product_id":"kp-pf-036","title":"KindPack PocketSeal High-Barrier Pouch","description":"\u003cp\u003ePocketSeal is built for products that degrade quickly. Fish flakes and freeze-dried aquatic diets oxidize fast, so a high-barrier body plus a recessed pocket zipper, which shields the closure track from powder contamination, keeps the opening functional to the last scoop.\u003c\/p\u003e\n\u003cp\u003eThe closure sits inside a folded top lip so flakes cannot jam the zipper, a persistent failure in flat-zipper bags. Chalkboard-finish graphics with chalk-drawn species illustration suit the specialty aquatic and reptile shelf.\u003c\/p\u003e\n\u003cp\u003eNothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No bio-based content, recyclability, mass-balance, compostability or carbon claim is validated for this SKU.\u003c\/p\u003e\n\u003cp\u003eBio-based share of the total pack, the bio-carbon content of the film, the effect of the valve body on any recovery route, and any mass-balance model are all unverified. Until declarations and an independent assessment are on file, the only permitted wording is 'bio-based PE direction - content and claim status under verification'.\u003c\/p\u003e\n\u003cp\u003eDuties \u0026amp;amp; taxes are not included in quoted prices.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e High-Barrier Stand-Up Pouch with Pocket Zipper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e High-Barrier Stand-Up Pouch with Pocket Zipper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Pocket-style zipper recessed into an inner fold, plus an easy-tear notch above it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial direction:\u003c\/strong\u003e Bio-based mono-PE with a valve and high-barrier direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 105-140 micron total; the pocket fold zone is locally doubled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard sizes:\u003c\/strong\u003e 1 oz \/ 2.5 oz \/ 5 oz (28 g \/ 71 g \/ 142 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished dimensions:\u003c\/strong\u003e 1 oz \/ 2.5 oz \/ 5 oz (28 g \/ 71 g \/ 142 g). Finished size W x H + bottom gusset (mm): 1 oz approx. 110 x 180 + 45; 2.5 oz approx. 130 x 210 + 50; 5 oz approx. 150 x 240 + 55.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Flexographic surface print, up to 8 stations, water-based inks, with a masked area reserved for the valve weld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte finish with a soft-touch hand feel; no foil and no metallic ink so the mono-material direction is preserved\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow:\u003c\/strong\u003e None in the default build. A mono-material PE window is theoretically possible but the valve placement and the barrier requirement make it a to be confirmed special request only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e None. Not offered on this retail-size format\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve or spout:\u003c\/strong\u003e One-way degassing valve, welded or rivet-fitted, with a reinforcing patch; valve body material and recyclability compatibility to be confirmed. No drinking or pouring spout is offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental status:\u003c\/strong\u003e Claim pending - not verified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOQ:\u003c\/strong\u003e 10,000 pcs \/ SKU (first run)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead time:\u003c\/strong\u003e Sample: 15-20 business days; mass production: 32-48 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial terms:\u003c\/strong\u003e Ex-works unit price and shipping terms to be confirmed on quotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KindPack Pouch","offers":[{"title":"2,500 pcs","offer_id":58707649823023,"sku":"KP-PF-036-2500","price":467.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/2094\/5199\/files\/KP-PF-036-1_d07b1fb7-7b59-452c-88e1-fef4ae3bff5c.webp?v=1789837760"}],"url":"https:\/\/shop.petpouchpack.com\/collections\/stand-up-pouches.oembed","provider":"KindPack Pouch","version":"1.0","type":"link"}