Mono-PP Spout Pouch for Wet Food and Gravy Toppers
Mono-PP Spout Pouch for Wet Food and Gravy Toppers
A stand-up spout pouch in a mono-material PP direction for wet food, gravies and broths.
Specification
| Bag type | Green & Recyclable |
| Structure | Stand-up pouch with a welded spout fitment, contoured bottom gusset for free standing, rounded side profile for grip, and a pour-and-squeeze body designed for direct dispensing over a bowl |
| Material | DRAFT / TO CONFIRM - mono-material PP direction. Sample candidates: (a) BOPP 20 micron / water-based ink / cast PP sealant 80-95 micron with a PP spout fitment; (b) PP/PP-retort-capable structure for hot-fill or retort options where the fill requires it. Spout fitment polymer grade, hot-fill temperature limit and seal strength are unverified and must be confirmed by fill trials. |
| Total thickness | 100-120 microns total, excluding the spout fitment (Draft / To Confirm) |
| Closure | Screw-cap spout with a tamper-evident ring, fitted to the top corner; the cap is the only rigid part |
| Print process | Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone (Draft / To Confirm) |
| Finish | Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer |
| Window | A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is To Confirm against the mono-PP build |
| Handle | None. Not applicable to this retail format |
| Degassing valve | Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 80 g / 150 g / 250 g (2.8 oz / 5.3 oz / 8.8 oz) - Draft / To Confirm |
| Dimensions (W x H + gusset) | Draft / To Confirm - approx. W x H + bottom gusset: 80 g 110 x 175 + 45; 150 g 130 x 210 + 55; 250 g 150 x 240 + 65 |
| Monthly capacity | 1,000,000-2,500,000 pcs per month across sizes on multiple filling lines |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.356 / pc |
| 1,000 pcs | USD 0.321 / pc |
| 5,000 pcs | USD 0.178 / pc |
| 20,000 pcs | USD 0.134 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 25-35 days |
| Sample lead time | 12-18 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letter for the PP film and the PP spout fitment - TO REQUEST | Declaration of Compliance covering film, spout, cap, liner and printing ink - TO PREPARE | Migration test report including the spout weld zone and the cap liner - TO REQUEST | Hot-fill or retort validation report if the fill is filled hot - TO PREPARE | Spout seal strength, burst and drop test report at 250 g - TO PREPARE | Tamper-evidence function test and cap torque specification - TO PREPARE | Shelf-life and seal-integrity study for wet fill - TO PREPARE | Converting and filling line GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. |
About this structure
Wet food needs a pack that can be squeezed clean and closed again without a bowl of leftovers. This pouch is built around a welded screw-cap spout with a tamper-evident ring, sized in three steps from a single-serve 80 g to a 250 g multi-serve. The body is specified in a PP direction so the film and the spout share one polymer family, and the front panel is left unprinted in a clear zone so the fill reads through. The matte band keeps the pack from looking like a generic juice pouch on the shelf. Duties & taxes are not included in quoted prices.
Why brands choose it
- Clean Pour - liquid-format packaging with crisp highlights
- Green & Recyclable
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.