KindPack TwinCell Eight-Side Pouch
KindPack TwinCell Eight-Side Pouch
Two-compartment pouch that keeps a base kibble and its mixer or supplement together with separate resealable openings. Rebuilt into the KP-ECO-003 PCR Quad-Seal Bulk Kibble Bag green parameter family: mono-PE with a post-consumer recycled (PCR) content direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specification
| Bag type | Green & Recyclable |
| Structure | Eight-side-seal pouch divided by an internal seal wall into two cells with separate openings, sharing one printed outer surface Re-homed to the KP-ECO-003 PCR Quad-Seal Bulk Kibble Bag build direction: Quad-seal box-bottom bag with four vertical corner seals so it stands as a free-standing column with a square footprint; reinforced top gusset and a two-stage opening line; internal zipper located below the reduced-height fill line (Draft / To Confirm). |
| Material | DRAFT / TO CONFIRM - KP-ECO-003 family material direction: DRAFT / TO CONFIRM - mono-material PE direction with a post-consumer recycled content target. Sample candidates: (a) MDO-PE 30 micron / water-based ink / PE sealant 110-130 micron with 30% PCR direction in the sealant layer; (b) coextruded mono-PE structure with a higher PCR share pending drop and puncture testing. PCR percentage, sealant grade and barrier level are unverified and must be confirmed by testing - not a confirmed specification. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: barrier composite selected per cell content, since the base cell and the companion cell may need different oxygen and moisture protection; the internal wall must be validated for seal integrity. |
| Total thickness | 120-155 micron total per web; the internal wall zone is a doubled structure (Draft / To Confirm) - family reference for KP-ECO-003: 140-170 microns total (Draft / To Confirm) - Draft / To Confirm |
| Closure | Independent press-to-close zippers on each compartment, plus a shared easy-tear notch at the top |
| Print process | Flexographic surface print, up to 8 stations, water-based inks; large-format screens sized for the 320-420 mm face (Draft / To Confirm) Applied to this SKU's Eight-Side-Seal Pouch with Dual Compartments format. |
| Finish | Matte finish overall with a scuff-resistant topcoat direction on the corner seals; no metallic ink, no foil Original catalogue surface direction to confirm: Matte outer with gloss divider line and dual-color cell coding |
| Window | None. A clear panel is not offered in the PCR mono-PE build because a dissimilar window film would interrupt the single-material direction Format note for KP-PF-034: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Handle | Die-cut reinforced handle integrated into the top gusset of the 25 lb and 35 lb sizes; handle patch material to be matched to the same PE family - To Confirm Format note for KP-PF-034: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Degassing valve | None. No spout and no valve; this format is for dry kibble only Format note for KP-PF-034: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | Base cell 3 lb / 5 lb (1.36 kg / 2.3 kg) with a 4 oz / 8 oz (113 g / 227 g) companion cell - Draft / To Confirm against fill weight and bulk density |
| Dimensions (W x H + gusset) | Base cell 3 lb / 5 lb (1.36 kg / 2.3 kg) with a 4 oz / 8 oz (113 g / 227 g) companion cell. Draft finished size W x H x depth (mm): base cell 3 lb approx. 240 x 370 x 90; 5 lb approx. 270 x 410 x 100; companion cell occupies approximately 25-30 percent of the total volume. Draft / To Confirm against the intended fill split. |
| Monthly capacity | 200,000-500,000 pcs / month |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.881 / pc |
| 1,000 pcs | USD 0.793 / pc |
| 5,000 pcs | USD 0.440 / pc |
| 20,000 pcs | USD 0.330 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 35-50 days |
| Sample lead time | 15-22 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letter and resin declaration for the PCR-containing layers - TO REQUEST | PCR feedstock documentation: source, grade, cleaning process and food-contact suitability - TO REQUEST | Overall and specific migration test report on the finished structure - TO REQUEST | Declaration of Compliance for material, PCR content and printing ink - TO PREPARE | Heavy-metal and contaminant screening report for the recycled input - TO REQUEST | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | Handle and corner-seal tensile, puncture and drop test report at 25 lb and 35 lb - TO PREPARE | Stacking and pallet compression test report for warehouse storage - TO PREPARE | Food-contact declaration for this SKU's closure and fitment components (Independent press-to-close zippers on each compartment, plus a shared easy-tear notch at t) - TO REQUEST from the component supplier |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. Any post-consumer recycled content figure and any recyclability statement for this SKU are unverified. Recycled content must be supported either by physical content traceability or by a documented mass-balance approach, and store drop-off eligibility for the thick mono-PE structure must be assessed separately, because heavier films are not automatically accepted. Until documentation exists, wording stays at 'mono-material PE with a recycled-content direction - verification pending'. SKU note for KP-PF-034: the claim-critical components are the closure and fitment actually used on this build (Independent press-to-close zippers on each compartment, plus a shared easy-tear notch at the top) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes. |
About this structure
TwinCell merges two products into one package. An internal seal wall creates independent compartments with their own zippers, so a base kibble and a topper, or a food and its supplement, stay separate and fresh but always travel together. For a brand, that turns a two-item purchase into a single SKU and a single reorder trigger. Each cell can use a barrier specification matched to its own contents, and terrazzo confetti graphics make the mixed-material look a deliberate design language for curated and custom-blend brands. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-003 - PCR Quad-Seal Bulk Kibble Bag - on the basis of structure-first match: eight-side-seal block build with an added internal seal wall. The family design direction is: Keep the structure mono-material PE so the bag stays in one stream, and push recycled content into the layers where it can be validated rather than claiming a headline percentage; downgauge the corner seals for source reduction; water-based inks; solvent-free lamination; and a handle patch specified in the same polymer family. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. Any post-consumer recycled content figure and any recyclability statement for this SKU are unverified. Recycled content must be supported either by physical content traceability or by a documented mass-balance approach, and store drop-off eligibility for the thick mono-PE structure must be assessed separately, because heavier films are not automatically accepted. Until documentation exists, wording stays at 'mono-material PE with a recycled-content direction - verification pending'. Duties & taxes are not included in quoted prices.
Why brands choose it
- Square Column - heavy format packaging with structural geometry - applied to the Eight-Side-Seal Pouch with Dual Compartments format
- PCR Quad-Seal Bulk Kibble Bag
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.