Slider-Zip Pour-Spout Refill Kibble Pouch
Slider-Zip Pour-Spout Refill Kibble Pouch
A large refill pouch with a wide slider top for filling and scooping, plus a pour spout for serving without opening the pack.
Specification
| Bag type | Green & Recyclable |
| Structure | Stand-up refill pouch with a slider zipper track and a welded pour-spout fitment, a reinforced bottom gusset, an inner anti-sift fold at the bottom, and a soft side-loop carry handle welded to the body |
| Material | DRAFT / TO CONFIRM - mono-material PE direction so the body, the slider zipper and the spout fitment can be evaluated as one stream. Sample candidates: (a) MDO-PE 25 micron / water-based ink / PE sealant 100-120 micron with a PE slider track and a PE-compatible spout fitment; (b) the same structure with a 30% PCR direction in the sealant layer. Slider track grade, spout fitment polymer, PCR share and the overall material compatibility of the closures are UNVERIFIED and must be confirmed by testing - not a confirmed specification. |
| Total thickness | 125-150 microns total, excluding the spout fitment and slider (Draft / To Confirm) |
| Closure | Wide slider zipper across the top for refilling and scooping, plus a pour spout with a hinged flip cap on the upper-right shoulder for pouring into a bowl or a hopper without opening the full top |
| Print process | Flexographic surface print, up to 8 stations, water-based inks, with masked weld zones reserved for the spout fitment, the slider track and the handle patch (Draft / To Confirm) |
| Finish | Matte body with a scuff-resistant topcoat direction on the shoulder and handle zones; no foil, no metallic ink |
| Window | None. Neither a window patch nor a clear zone is offered, because the slider track, the spout fitment and the handle already introduce closure components into the structure |
| Handle | Soft side-loop carry handle welded to the body, matched to the same PE family - To Confirm for load and weld strength at the 20 lb fill |
| Degassing valve | Pour spout with a hinged flip cap, welded to the upper-right shoulder; spout diameter and cap type To Confirm. No degassing valve on this SKU |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 8 lb / 15 lb / 20 lb (3.6 kg / 6.8 kg / 9.1 kg) - Draft / To Confirm |
| Dimensions (W x H + gusset) | Draft / To Confirm - approx. W x H + bottom gusset: 8 lb 260 x 400 + 85; 15 lb 320 x 470 + 100; 20 lb 350 x 520 + 110 |
| Monthly capacity | 250,000-700,000 pcs per month across sizes |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 1.079 / pc |
| 1,000 pcs | USD 0.971 / pc |
| 5,000 pcs | USD 0.539 / pc |
| 20,000 pcs | USD 0.405 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 30-40 days |
| Sample lead time | 15-22 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letters for the PE film, the slider track, the spout fitment and the handle patch - TO REQUEST | Declaration of Compliance covering film, slider, spout, cap, handle and printing ink - TO PREPARE | Migration test report including the slider channel, the spout weld and the cap seal - TO REQUEST | Slider zipper cycle test (open / close cycles) and pull-strength report - TO PREPARE | Spout weld strength, burst pressure and leak test report at fill weight - TO PREPARE | Handle weld load test at the 20 lb fill and drop test from handling height - TO PREPARE | Anti-sift fold performance and fine-powder retention test - TO PREPARE | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | PCR feedstock and food-contact suitability documentation if recycled content is used - TO REQUEST |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. This SKU carries the highest number of non-film components in the set - a slider track, a spout fitment and a handle patch - so any mono-material or recyclability claim requires all three components to be assessed together with the body, not just the film. Slider track grade, spout polymer, handle weld material, PCR content and recovery eligibility are all unverified. Until documentation and an assessment are on file, the only permitted wording is 'mono-material PE direction with matched closure components - whole-pack claim under verification'. |
About this structure
Refill formats only work if they are easier to use than the container they replace. This pouch answers with two openings: a wide slider zipper across the top for pouring in a full refill or scooping out a portion, and a welded pour spout on the shoulder for serving straight into a bowl. A soft side-loop handle takes the strain of a 20 lb fill, and an anti-sift fold at the bottom keeps fine powder from settling into the seal. The structure is kept to a single PE family so the body and the closure components can be assessed together, and the front panel is left blank for the buyer's brand. Duties & taxes are not included in quoted prices.
Why brands choose it
- Refill Station - large format handling with two openings
- Green & Recyclable
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.