KindPack EuroHang Side-Gusset Pouch
KindPack EuroHang Side-Gusset Pouch
Pegboard-ready side-gusset pouch with a punched euro slot and a stiffened header that keeps it hanging flat. Rebuilt into the KP-ECO-006 Companion Small-Pet Side-Gusset Feed Pouch green parameter family: mono-material side-gusset feed-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specification
| Bag type | Green & Recyclable |
| Structure | Flat side-gusset pouch with a punched euro slot in the top flange and a stiffened header for pegboard stability Re-homed to the KP-ECO-006 Companion Small-Pet Side-Gusset Feed Pouch build direction: Side-gusset pouch with two lateral gussets and a wide-mouth top, so the pack opens into a bin-like shape and a scoop or hand reaches the bottom easily; reinforced bottom fold for a flat stand (Draft / To Confirm). |
| Material | DRAFT / TO CONFIRM - KP-ECO-006 family material direction: DRAFT / TO CONFIRM - mono-material PE direction, avoiding a paper or mixed-fibre layer so that pelleted feed dust does not compromise the seal. Sample candidates: (a) MDO-PE 25 micron / water-based ink / PE sealant 90-105 micron; (b) PE structure with a 30% PCR direction for the outer layer. Grade, PCR share and seal performance against pellet dust are unverified and must be confirmed by filling trials - not a confirmed specification. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: PET/PE composite with a stiffened header board insert; a recyclable mono-PP direction is available if peg rigidity can be met without the insert. |
| Total thickness | 95-125 micron total at the body; header zone stiffened by an insert board of approx. 300-400 micron (Draft / To Confirm) - family reference for KP-ECO-006: 115-130 microns total (Draft / To Confirm) - Draft / To Confirm |
| Closure | Center euro-slot hang hole plus resealable press-to-close strip |
| Print process | Flexographic surface print, up to 8 stations, water-based inks, with print clear of the gusset folds (Draft / To Confirm) Applied to this SKU's Side-Gusset Flat Pouch with Euro Hang Hole format. |
| Finish | Matte finish throughout with a smooth seal band at the top; no foil, no metallic ink Original catalogue surface direction to confirm: High-gloss with bold flat-color blocking and a matte white copy area |
| Window | A wide clear unprinted band is available on the front so the pellet colour and fill level read through; the clear zone uses the same PE film rather than a separate window patch - To Confirm Format note for KP-PF-006: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Handle | None on 1 lb and 2.5 lb; a punched finger-hole or a soft die-cut handle on the 5 lb size - To Confirm Format note for KP-PF-006: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Degassing valve | None. Dry pelleted feed only, with no valve or spout offered Format note for KP-PF-006: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 5 oz / 10 oz / 16 oz (142 g / 283 g / 454 g) - Draft / To Confirm against fill weight and bulk density |
| Dimensions (W x H + gusset) | 5 oz / 10 oz / 16 oz (142 g / 283 g / 454 g). Draft finished size W x H + side gusset, excluding header (mm): 5 oz approx. 140 x 230 + 35; 10 oz approx. 165 x 270 + 40; 16 oz approx. 190 x 300 + 45; draft stiffened header height approx. 40 mm with a euro slot. Draft / To Confirm against pegboard pitch. |
| Monthly capacity | 700,000-1,600,000 pcs / month |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.267 / pc |
| 1,000 pcs | USD 0.240 / pc |
| 5,000 pcs | USD 0.134 / pc |
| 20,000 pcs | USD 0.100 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 25-38 days |
| Sample lead time | 10-15 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letter for the PE film and the zipper profile - TO REQUEST | Declaration of Compliance covering material, PCR content (if used) and printing ink - TO PREPARE | Migration test report for the finished laminate and the printed surface - TO REQUEST | PCR feedstock and food-contact suitability documentation if recycled content is used - TO REQUEST | Seal strength and dust-ingress test report at the 5 lb fill weight - TO PREPARE | Drop and stacking test report for the gusset folds - TO PREPARE | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | Any statement about pesticides, mould or dust control on the fill side needs a supplier declaration - TO CONFIRM | Food-contact declaration for this SKU's closure and fitment components (Center euro-slot hang hole plus resealable press-to-close strip) - TO REQUEST from the component supplier |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content or mono-material claim is validated for this SKU. Store drop-off eligibility for a side-gusset pack of this thickness, the effect of the zipper profile on any recovery route, and any PCR figure all remain unverified. Only the wording 'mono-material PE direction - claim status under verification' may be used until supplier declarations and an independent assessment are on file. SKU note for KP-PF-006: the claim-critical components are the closure and fitment actually used on this build (Center euro-slot hang hole plus resealable press-to-close strip) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes. |
About this structure
EuroHang is built for the peg strip. A punched euro slot sits in a stiffened header so the pouch hangs straight instead of curling, and the flat side-gusset face gives tooth-and-claw graphics a clean surface. Resealable after opening, it keeps dental chews from drying out between uses. The bold typographic system uses flat color blocks that stay legible in a phone photo, and the matte white copy area keeps ingredient claims readable under store lighting. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-006 - Companion Small-Pet Side-Gusset Feed Pouch - on the basis of structure-first match: flat side-gusset pouch; the euro-slot pegboard header and chew fill are carried as format variants of the family. The family design direction is: Keep the structure mono-material PE and skip any paper layer that pellet dust would compromise; use water-based inks; taper the gusset film to cut material use where the seal allows; keep the zipper in the same polymer family so the closure does not interrupt a film recovery route; and avoid metallic inks entirely. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content or mono-material claim is validated for this SKU. Store drop-off eligibility for a side-gusset pack of this thickness, the effect of the zipper profile on any recovery route, and any PCR figure all remain unverified. Only the wording 'mono-material PE direction - claim status under verification' may be used until supplier declarations and an independent assessment are on file. Duties & taxes are not included in quoted prices.
Why brands choose it
- Wide Open - bin-shaped handling format for scoop users - applied to the Side-Gusset Flat Pouch with Euro Hang Hole format
- Companion Small-Pet Side-Gusset Feed Pouch
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.