KindPack PaperRoot Kraft Pouch
KindPack PaperRoot Kraft Pouch
Paper-forward treat pouch with a tin-tie fold, built for brands whose shoppers equate paper with freshness and lower plastic. Rebuilt into the KP-ECO-008 Tin-Tie Kraft Treat Pouch green parameter family: paper-first tin-tie treat-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specification
| Bag type | Green & Recyclable |
| Structure | Kraft paper outer with a functional barrier inner layer, block-bottom or stand-up format and a folded tin-tie header Re-homed to the KP-ECO-008 Tin-Tie Kraft Treat Pouch build direction: Flat gusseted pouch with a folded tin-tie top, a glued or heat-sealed bottom, and side gussets that let the pack expand as it is filled; the top folds over onto itself and the wire holds it closed again after opening (Draft / To Confirm). |
| Material | DRAFT / TO CONFIRM - KP-ECO-008 family material direction: DRAFT / TO CONFIRM - paper-first construction with the smallest possible functional layer. Sample candidates: (a) kraft paper 60-70 gsm with a thin dispersion barrier coating and a grease-resistant treatment, no film liner; (b) as above with a very thin bio-based sealant liner where the fill requires a heat seal. The tin-tie wire, the coating chemistry and the actual repulpability of the finished pack are unverified and must be mill tested before any fibre wording is used. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: paper-forward construction with a bio-based or plastic-free barrier coating, or a paper/PE hybrid where moisture protection takes priority. Barrier performance must be confirmed against the specific product's moisture sensitivity. |
| Total thickness | 130-180 micron total as a paper/PE laminate equivalent (Draft / To Confirm; paper is specified in gsm, film in micron) - family reference for KP-ECO-008: 90-130 microns including the paper web and any coating (Draft / To Confirm) - Draft / To Confirm |
| Closure | Tin tie top fold with a resealable press-to-close strip for repeat opening |
| Print process | Flexographic surface print on paper, up to 6 stations, water-based inks (Draft / To Confirm) Applied to this SKU's Plastic-Free-Direction Paper Pouch format. |
| Finish | Uncoated natural kraft surface with a matte hand feel; optional single-colour blind deboss or a spot varnish accent; no foil stamping and no metallised layer Original catalogue surface direction to confirm: Uncoated natural kraft texture with single-color flexo print and a blind-emboss logo |
| Window | None in the default paper-first build. A fibre-based transparent film window is a To Confirm option only where the barrier requirement is low Format note for KP-PF-010: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Handle | None. The format is a hand-carried small-to-mid pouch Format note for KP-PF-010: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Degassing valve | None. No valve and no spout; dry biscuits and treats only Format note for KP-PF-010: Window, handle and valve or spout options are not part of this SKU build unless listed; any addition must be re-verified inside the family material direction. |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 4 oz / 8 oz / 1 lb (113 g / 227 g / 454 g) - Draft / To Confirm against fill weight and bulk density |
| Dimensions (W x H + gusset) | 4 oz / 8 oz / 1 lb (113 g / 227 g / 454 g). Draft finished size W x H + base (mm): 4 oz approx. 130 x 210 + 45; 8 oz approx. 160 x 250 + 55; 1 lb approx. 190 x 290 + 65. Draft / To Confirm against the tin-tie header width and moisture-barrier requirement. |
| Monthly capacity | 400,000-900,000 pcs / month |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.366 / pc |
| 1,000 pcs | USD 0.330 / pc |
| 5,000 pcs | USD 0.183 / pc |
| 20,000 pcs | USD 0.137 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 28-40 days |
| Sample lead time | 12-18 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letter for the paper stock, coating and any liner - TO REQUEST | Declaration of Compliance covering paper, coating, tin tie and printing ink - TO PREPARE | Migration and food-contact report for the grease-resistant treatment - TO REQUEST | Mineral-oil (MOSH / MOAH) screening for the fibre input - TO REQUEST | Tin-tie wire specification and food-contact suitability statement - TO REQUEST | Grease and moisture barrier performance report for biscuit storage - TO PREPARE | Repulpability and fibre-recovery test report from a mill or independent lab - TO PREPARE | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | Food-contact declaration for this SKU's closure and fitment components (Tin tie top fold with a resealable press-to-close strip for repeat opening) - TO REQUEST from the component supplier |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. No repulpability, paper-recycling, recyclability, compostability or plastic-free claim is validated for this SKU. The tin-tie contains a metal wire and the pack may include a coating and a thin liner, so the fibre-recovery behaviour of the finished pack is unverified. Any fibre-first wording must wait for a mill or laboratory repulpability result; until then use only 'paper-first construction with a wire tie - recovery behaviour under verification'. SKU note for KP-PF-010: the claim-critical components are the closure and fitment actually used on this build (Tin tie top fold with a resealable press-to-close strip for repeat opening) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes. |
About this structure
PaperRoot gives a treat brand an unmistakably natural surface. The kraft outer carries a single-color vintage seed-packet style illustration, and a blind emboss replaces a printed logo for a tactile, low-ink look. Inside, a functional barrier layer defends against moisture so biscuits stay crisp. The tin-tie fold is a familiar, satisfying closure for small-format treats, and it doubles as a merchandising signal that the pack is paper-forward. Barrier selection is matched to the product's moisture sensitivity during sampling. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-008 - Tin-Tie Kraft Treat Pouch - on the basis of exact structural match: kraft paper pouch with a tin-tie top fold. The family design direction is: Maximise the paper share and leave the pack unlined wherever the fill allows; use a water-based or dispersion barrier treatment rather than a plastic layer; keep the only non-paper component to the tin-tie wire and design it for easy separation; avoid foil, metallised film and plastic windows; and specify FSC or equivalent certified fibre as a procurement requirement rather than as a claim on pack. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No repulpability, paper-recycling, recyclability, compostability or plastic-free claim is validated for this SKU. The tin-tie contains a metal wire and the pack may include a coating and a thin liner, so the fibre-recovery behaviour of the finished pack is unverified. Any fibre-first wording must wait for a mill or laboratory repulpability result; until then use only 'paper-first construction with a wire tie - recovery behaviour under verification'. Duties & taxes are not included in quoted prices.
Why brands choose it
- Paper Fold - tactile kraft surfaces and honest creases - applied to the Plastic-Free-Direction Paper Pouch format
- Tin-Tie Kraft Treat Pouch
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.