KindPack HeatHold Retort Pouch
KindPack HeatHold Retort Pouch
Retort-grade wet food pouch built to withstand thermal processing and stack flat in storage. Rebuilt into the KP-ECO-005 Mono-PP Spout Pouch for Wet Food and Gravy Toppers green parameter family: mono-material PP spout-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specification
| Bag type | Green & Recyclable |
| Structure | Retort-grade three-side-seal or stand-up pouch with heat-resistant seals and a reinforced fin Re-homed to the KP-ECO-005 Mono-PP Spout Pouch for Wet Food and Gravy Toppers build direction: Stand-up pouch with a welded spout fitment, contoured bottom gusset for free standing, rounded side profile for grip, and a pour-and-squeeze body designed for direct dispensing over a bowl (Draft / To Confirm). |
| Material | DRAFT / TO CONFIRM - KP-ECO-005 family material direction: DRAFT / TO CONFIRM - mono-material PP direction. Sample candidates: (a) BOPP 20 micron / water-based ink / cast PP sealant 80-95 micron with a PP spout fitment; (b) PP/PP-retort-capable structure for hot-fill or retort options where the fill requires it. Spout fitment polymer grade, hot-fill temperature limit and seal strength are unverified and must be confirmed by fill trials. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: retort-capable cast polypropylene laminate built for thermal processing; the exact construction and process window must be validated against the co-packer's cook profile. |
| Total thickness | 120-160 micron total (Draft / To Confirm by retort temperature and time) - family reference for KP-ECO-005: 100-120 microns total, excluding the spout fitment (Draft / To Confirm) - Draft / To Confirm |
| Closure | Easy-peel tear notch with an optional resealable press-to-close strip on family sizes |
| Print process | Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone (Draft / To Confirm) Applied to this SKU's Retort Pouch for Thermally Processed Wet Food format. |
| Finish | Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer Original catalogue surface direction to confirm: Gloss retort-resistant surface with a matte label band and temperature-stable inks |
| Window | A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is To Confirm against the mono-PP build Format note for KP-PF-016: Retort process window and any reseal strip must be validated against the co-packer cook profile inside the family material direction. |
| Handle | None. Not applicable to this retail format Format note for KP-PF-016: Retort process window and any reseal strip must be validated against the co-packer cook profile inside the family material direction. |
| Degassing valve | Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve Format note for KP-PF-016: Retort process window and any reseal strip must be validated against the co-packer cook profile inside the family material direction. |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 3 oz / 5 oz / 13 oz (85 g / 142 g / 368 g) - Draft / To Confirm against fill weight and bulk density |
| Dimensions (W x H + gusset) | 3 oz / 5 oz / 13 oz (85 g / 142 g / 368 g). Draft finished size W x H (mm): 3 oz approx. 100 x 140 fin-seal, or 120 x 160 stand-up; 5 oz approx. 110 x 160 fin-seal; 13 oz approx. 140 x 200 + 55 bottom gusset. Draft / To Confirm against the co-packer tray and cook profile. |
| Monthly capacity | 800,000-2,000,000 pcs / month |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.317 / pc |
| 1,000 pcs | USD 0.285 / pc |
| 5,000 pcs | USD 0.158 / pc |
| 20,000 pcs | USD 0.119 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 35-50 days |
| Sample lead time | 15-20 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letter for the PP film and the PP spout fitment - TO REQUEST | Declaration of Compliance covering film, spout, cap, liner and printing ink - TO PREPARE | Migration test report including the spout weld zone and the cap liner - TO REQUEST | Hot-fill or retort validation report if the fill is filled hot - TO PREPARE | Spout seal strength, burst and drop test report at 250 g - TO PREPARE | Tamper-evidence function test and cap torque specification - TO PREPARE | Shelf-life and seal-integrity study for wet fill - TO PREPARE | Converting and filling line GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | Food-contact declaration for this SKU's closure and fitment components (Easy-peel tear notch with an optional resealable press-to-close strip on family sizes) - TO REQUEST from the component supplier |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. SKU note for KP-PF-016: the claim-critical components are the closure and fitment actually used on this build (Easy-peel tear notch with an optional resealable press-to-close strip on family sizes) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes. |
About this structure
HeatHold brings wet food into a flexible format. Retort-grade seals and cast polypropylene layers allow the pouch to survive a full cook cycle, then ship lighter and store flatter than cans or trays. The easy-peel tear opens cleanly without a can opener or a knife, and family sizes can add a resealable strip for partial use. Heritage butcher-block graphics frame a fresh-food positioning for brands competing against premium refrigerated lines. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-005 - Mono-PP Spout Pouch for Wet Food and Gravy Toppers - on the basis of structure-first match: mono-pp wet-fill pouch; the retort process window is carried as a variant of the spout-pouch family build. The family design direction is: Specify a PP film and a PP spout fitment so the pouch body and the only rigid component share one polymer family; keep the ink load low and water-based; avoid aluminium foil and metallised layers that a wet-fill barrier would otherwise invite; and design the pouch so the cap can later be specified as a compatibly sized standard fitment. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. Duties & taxes are not included in quoted prices.
Why brands choose it
- Clean Pour - liquid-format packaging with crisp highlights - applied to the Retort Pouch for Thermally Processed Wet Food format
- Mono-PP Spout Pouch for Wet Food and Gravy Toppers
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.