KindPack RefillSnip Doypack
KindPack RefillSnip Doypack
Slim refill pouch with a snip-and-pour corner that empties cleanly into reusable pet food bins. Rebuilt into the KP-ECO-010 Slider-Zip Pour-Spout Refill Kibble Pouch green parameter family: refill-format direction with a mono-PE body and matched-polymer closure parts. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specification
| Bag type | Green & Recyclable |
| Structure | Slim refill Doypack with a tapered pour corner and a bottom gusset; designed to sit inside a standard 1.5-gallon pet bin Re-homed to the KP-ECO-010 Slider-Zip Pour-Spout Refill Kibble Pouch build direction: Stand-up refill pouch with a slider zipper track and a welded pour-spout fitment, a reinforced bottom gusset, an inner anti-sift fold at the bottom, and a soft side-loop carry handle welded to the body (Draft / To Confirm). |
| Material | DRAFT / TO CONFIRM - KP-ECO-010 family material direction: DRAFT / TO CONFIRM - mono-material PE direction so the body, the slider zipper and the spout fitment can be evaluated as one stream. Sample candidates: (a) MDO-PE 25 micron / water-based ink / PE sealant 100-120 micron with a PE slider track and a PE-compatible spout fitment; (b) the same structure with a 30% PCR direction in the sealant layer. Slider track grade, spout fitment polymer, PCR share and the overall material compatibility of the closures are UNVERIFIED and must be confirmed by testing - not a confirmed specification. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: lightweight mono-PE direction for material reduction, or a standard PET/PE laminate where longer pantry life is required. Recyclability wording must be confirmed before use. |
| Total thickness | 90-120 micron total (Draft / To Confirm) - family reference for KP-ECO-010: 125-150 microns total, excluding the spout fitment and slider (Draft / To Confirm) - Draft / To Confirm |
| Closure | Snip-and-pour corner seal, with an optional resealable press-to-close strip for partial pours |
| Print process | Flexographic surface print, up to 8 stations, water-based inks, with masked weld zones reserved for the spout fitment, the slider track and the handle patch (Draft / To Confirm) Applied to this SKU's Refill Doypack with Snip-Corner Pour Spout format. |
| Finish | Matte body with a scuff-resistant topcoat direction on the shoulder and handle zones; no foil, no metallic ink Original catalogue surface direction to confirm: Matte surface with high-contrast block-color graphics and a printed fill-guide line |
| Window | None. Neither a window patch nor a clear zone is offered, because the slider track, the spout fitment and the handle already introduce closure components into the structure Format note for KP-PF-018: Snip or pour opening plus reclose zipper are the primary closures; no separate window option in the default build. |
| Handle | Soft side-loop carry handle welded to the body, matched to the same PE family - To Confirm for load and weld strength at the 20 lb fill Format note for KP-PF-018: Snip or pour opening plus reclose zipper are the primary closures; no separate window option in the default build. |
| Degassing valve | Pour spout with a hinged flip cap, welded to the upper-right shoulder; spout diameter and cap type To Confirm. No degassing valve on this SKU Format note for KP-PF-018: Snip or pour opening plus reclose zipper are the primary closures; no separate window option in the default build. |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 1 lb / 2 lb / 4 lb (454 g / 907 g / 1.8 kg) - Draft / To Confirm against fill weight and bulk density |
| Dimensions (W x H + gusset) | 1 lb / 2 lb / 4 lb (454 g / 907 g / 1.8 kg). Draft finished size W x H + bottom gusset (mm): 1 lb approx. 150 x 260 + 60; 2 lb approx. 190 x 300 + 70; 4 lb approx. 230 x 350 + 80. Draft slim profile intended to sit inside a standard 1.5 gallon pet bin. Draft / To Confirm against the target bin. |
| Monthly capacity | 800,000-2,000,000 pcs / month |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.277 / pc |
| 1,000 pcs | USD 0.249 / pc |
| 5,000 pcs | USD 0.139 / pc |
| 20,000 pcs | USD 0.104 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 25-35 days |
| Sample lead time | 10-15 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letters for the PE film, the slider track, the spout fitment and the handle patch - TO REQUEST | Declaration of Compliance covering film, slider, spout, cap, handle and printing ink - TO PREPARE | Migration test report including the slider channel, the spout weld and the cap seal - TO REQUEST | Slider zipper cycle test (open / close cycles) and pull-strength report - TO PREPARE | Spout weld strength, burst pressure and leak test report at fill weight - TO PREPARE | Handle weld load test at the 20 lb fill and drop test from handling height - TO PREPARE | Anti-sift fold performance and fine-powder retention test - TO PREPARE | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | PCR feedstock and food-contact suitability documentation if recycled content is used - TO REQUEST | Food-contact declaration for this SKU's closure and fitment components (Snip-and-pour corner seal, with an optional resealable press-to-close strip for partial po) - TO REQUEST from the component supplier |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. This SKU carries the highest number of non-film components in the set - a slider track, a spout fitment and a handle patch - so any mono-material or recyclability claim requires all three components to be assessed together with the body, not just the film. Slider track grade, spout polymer, handle weld material, PCR content and recovery eligibility are all unverified. Until documentation and an assessment are on file, the only permitted wording is 'mono-material PE direction with matched closure components - whole-pack claim under verification'. SKU note for KP-PF-018: the claim-critical components are the closure and fitment actually used on this build (Snip-and-pour corner seal, with an optional resealable press-to-close strip for partial pours) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes. |
About this structure
RefillSnip is designed for the refill moment. Cut the marked corner and the tapered pour mouth empties into a standard pet bin without spilling a trail of kibble across the kitchen floor. The slim body cuts material and freight per pound of food, which is exactly what refill buyers are looking for. Apothecary-style graphics signal a considered, poultice-and-herbs heritage, and the printed fill-guide line tells the customer when the reusable bin is at the correct level. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-010 - Slider-Zip Pour-Spout Refill Kibble Pouch - on the basis of structure-first match: refill doypack with a pourable opening and a reclose zipper. The family design direction is: Specify the body film, the slider track, the spout fitment and the handle patch in one polymer family so a whole-pack claim is at least theoretically possible; keep the ink water-based and foil-free; use the slider as the refill path so the pouch can replace a rigid hopper or an outer carton rather than adding to it; and treat source reduction by downgauging the body film as the safest verified saving, since it can be quantified by mass comparison. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. This SKU carries the highest number of non-film components in the set - a slider track, a spout fitment and a handle patch - so any mono-material or recyclability claim requires all three components to be assessed together with the body, not just the film. Slider track grade, spout polymer, handle weld material, PCR content and recovery eligibility are all unverified. Until documentation and an assessment are on file, the only permitted wording is 'mono-material PE direction with matched closure components - whole-pack claim under verification'. Duties & taxes are not included in quoted prices.
Why brands choose it
- Refill Station - large format handling with two openings - applied to the Refill Doypack with Snip-Corner Pour Spout format
- Slider-Zip Pour-Spout Refill Kibble Pouch
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.