KindPack SlideSeal Quad Pouch
KindPack SlideSeal Quad Pouch
Flat-based pouch with a molded slider zipper for effortless open and close, even for young or senior hands. Rebuilt into the KP-ECO-010 Slider-Zip Pour-Spout Refill Kibble Pouch green parameter family: refill-format direction with a mono-PE body and matched-polymer closure parts. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specification
| Bag type | Green & Recyclable |
| Structure | Quad-seal body with a flat base and a slider closure welded across the full top width Re-homed to the KP-ECO-010 Slider-Zip Pour-Spout Refill Kibble Pouch build direction: Stand-up refill pouch with a slider zipper track and a welded pour-spout fitment, a reinforced bottom gusset, an inner anti-sift fold at the bottom, and a soft side-loop carry handle welded to the body (Draft / To Confirm). |
| Material | DRAFT / TO CONFIRM - KP-ECO-010 family material direction: DRAFT / TO CONFIRM - mono-material PE direction so the body, the slider zipper and the spout fitment can be evaluated as one stream. Sample candidates: (a) MDO-PE 25 micron / water-based ink / PE sealant 100-120 micron with a PE slider track and a PE-compatible spout fitment; (b) the same structure with a 30% PCR direction in the sealant layer. Slider track grade, spout fitment polymer, PCR share and the overall material compatibility of the closures are UNVERIFIED and must be confirmed by testing - not a confirmed specification. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: PET/PE composite with a reinforced slider-weld zone; mono-material options must be reviewed separately because slider hardware changes recyclability handling. |
| Total thickness | 130-165 micron total, with a locally heavier weld zone at the slider (Draft / To Confirm) - family reference for KP-ECO-010: 125-150 microns total, excluding the spout fitment and slider (Draft / To Confirm) - Draft / To Confirm |
| Closure | Molded slider zipper with a wide grip tab and a tear notch for initial opening |
| Print process | Flexographic surface print, up to 8 stations, water-based inks, with masked weld zones reserved for the spout fitment, the slider track and the handle patch (Draft / To Confirm) Applied to this SKU's Quad-Seal Pouch with Slider Zipper format. |
| Finish | Matte body with a scuff-resistant topcoat direction on the shoulder and handle zones; no foil, no metallic ink Original catalogue surface direction to confirm: Gloss body with a matte top band framing the slider |
| Window | None. Neither a window patch nor a clear zone is offered, because the slider track, the spout fitment and the handle already introduce closure components into the structure Format note for KP-PF-021: Molded slider zipper is the primary closure and its polymer must be matched to the family material direction. |
| Handle | Soft side-loop carry handle welded to the body, matched to the same PE family - To Confirm for load and weld strength at the 20 lb fill Format note for KP-PF-021: Molded slider zipper is the primary closure and its polymer must be matched to the family material direction. |
| Degassing valve | Pour spout with a hinged flip cap, welded to the upper-right shoulder; spout diameter and cap type To Confirm. No degassing valve on this SKU Format note for KP-PF-021: Molded slider zipper is the primary closure and its polymer must be matched to the family material direction. |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 4 lb / 8 lb / 15 lb (1.8 kg / 3.6 kg / 6.8 kg) - Draft / To Confirm against fill weight and bulk density |
| Dimensions (W x H + gusset) | 4 lb / 8 lb / 15 lb (1.8 kg / 3.6 kg / 6.8 kg). Draft finished size W x H (mm) with draft rectangular base: 4 lb approx. 230 x 370, base 130 x 80; 8 lb approx. 270 x 420, base 150 x 95; 15 lb approx. 310 x 480, base 170 x 110. Draft / To Confirm against the slider weld zone width and scoop access. |
| Monthly capacity | 300,000-800,000 pcs / month |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.881 / pc |
| 1,000 pcs | USD 0.793 / pc |
| 5,000 pcs | USD 0.440 / pc |
| 20,000 pcs | USD 0.330 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 35-50 days |
| Sample lead time | 15-20 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letters for the PE film, the slider track, the spout fitment and the handle patch - TO REQUEST | Declaration of Compliance covering film, slider, spout, cap, handle and printing ink - TO PREPARE | Migration test report including the slider channel, the spout weld and the cap seal - TO REQUEST | Slider zipper cycle test (open / close cycles) and pull-strength report - TO PREPARE | Spout weld strength, burst pressure and leak test report at fill weight - TO PREPARE | Handle weld load test at the 20 lb fill and drop test from handling height - TO PREPARE | Anti-sift fold performance and fine-powder retention test - TO PREPARE | Converting plant GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | PCR feedstock and food-contact suitability documentation if recycled content is used - TO REQUEST | Food-contact declaration for this SKU's closure and fitment components (Molded slider zipper with a wide grip tab and a tear notch for initial opening) - TO REQUEST from the component supplier |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. This SKU carries the highest number of non-film components in the set - a slider track, a spout fitment and a handle patch - so any mono-material or recyclability claim requires all three components to be assessed together with the body, not just the film. Slider track grade, spout polymer, handle weld material, PCR content and recovery eligibility are all unverified. Until documentation and an assessment are on file, the only permitted wording is 'mono-material PE direction with matched closure components - whole-pack claim under verification'. SKU note for KP-PF-021: the claim-critical components are the closure and fitment actually used on this build (Molded slider zipper with a wide grip tab and a tear notch for initial opening) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes. |
About this structure
SlideSeal replaces the fiddly press-to-close track with a molded slider. One pull opens the pack, one push closes it, and the wide grip tab works for children helping with feeding and for older owners with reduced hand strength. The quad-seal flat base keeps 15 lb upright in a pantry, and the slider is welded across the full top width so the opening stays wide enough for a scoop. Urban skyline graphics give a modern, city-living pet-parent positioning. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-010 - Slider-Zip Pour-Spout Refill Kibble Pouch - on the basis of structure-first match: molded slider zipper on a quad pouch. The family design direction is: Specify the body film, the slider track, the spout fitment and the handle patch in one polymer family so a whole-pack claim is at least theoretically possible; keep the ink water-based and foil-free; use the slider as the refill path so the pouch can replace a rigid hopper or an outer carton rather than adding to it; and treat source reduction by downgauging the body film as the safest verified saving, since it can be quantified by mass comparison. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. This SKU carries the highest number of non-film components in the set - a slider track, a spout fitment and a handle patch - so any mono-material or recyclability claim requires all three components to be assessed together with the body, not just the film. Slider track grade, spout polymer, handle weld material, PCR content and recovery eligibility are all unverified. Until documentation and an assessment are on file, the only permitted wording is 'mono-material PE direction with matched closure components - whole-pack claim under verification'. Duties & taxes are not included in quoted prices.
Why brands choose it
- Refill Station - large format handling with two openings - applied to the Quad-Seal Pouch with Slider Zipper format
- Slider-Zip Pour-Spout Refill Kibble Pouch
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.