KindPack MeasureCap Doypack
KindPack MeasureCap Doypack
Powder pouch with a graduated measuring cap that doses without a separate scoop and stores on the spout. Rebuilt into the KP-ECO-005 Mono-PP Spout Pouch for Wet Food and Gravy Toppers green parameter family: mono-material PP spout-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specification
| Bag type | Green & Recyclable |
| Structure | Stand-up pouch with a large-bore welded spout and a graduated cap; a rigid spout collar supports repeated cap removal Re-homed to the KP-ECO-005 Mono-PP Spout Pouch for Wet Food and Gravy Toppers build direction: Stand-up pouch with a welded spout fitment, contoured bottom gusset for free standing, rounded side profile for grip, and a pour-and-squeeze body designed for direct dispensing over a bowl (Draft / To Confirm). |
| Material | DRAFT / TO CONFIRM - KP-ECO-005 family material direction: DRAFT / TO CONFIRM - mono-material PP direction. Sample candidates: (a) BOPP 20 micron / water-based ink / cast PP sealant 80-95 micron with a PP spout fitment; (b) PP/PP-retort-capable structure for hot-fill or retort options where the fill requires it. Spout fitment polymer grade, hot-fill temperature limit and seal strength are unverified and must be confirmed by fill trials. SKU-specific options carried over from the original catalogue and still to be confirmed: Direction to select at sampling: high-barrier laminate for hygroscopic powders, with a rigid spout collar bonded into the pouch shoulder. Cap-to-pouch seal integrity should be verified with a drop test. |
| Total thickness | 115-150 micron total (Draft / To Confirm; the shoulder area carries the rigid collar insert) - family reference for KP-ECO-005: 100-120 microns total, excluding the spout fitment (Draft / To Confirm) - Draft / To Confirm |
| Closure | Wide-mouth spout with a graduated screw-on measuring cap that doubles as a scoop |
| Print process | Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone (Draft / To Confirm) Applied to this SKU's Stand-Up Pouch with Integrated Measuring-Cap Pour Spout format. |
| Finish | Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer Original catalogue surface direction to confirm: Matte body with a gloss cap panel and printed graduation icons |
| Window | A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is To Confirm against the mono-PP build Format note for KP-PF-032: Large-bore spout with a graduated measuring cap is the primary fitment; the dry powder fill means wet-fill and retort assumptions from the family are dropped. |
| Handle | None. Not applicable to this retail format Format note for KP-PF-032: Large-bore spout with a graduated measuring cap is the primary fitment; the dry powder fill means wet-fill and retort assumptions from the family are dropped. |
| Degassing valve | Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve Format note for KP-PF-032: Large-bore spout with a graduated measuring cap is the primary fitment; the dry powder fill means wet-fill and retort assumptions from the family are dropped. |
| Origin | Dongguan, Guangdong, China |
Sizes & fill weight
| Available sizes | 500 g / 1 kg / 2 kg (17.6 oz / 2.2 lb / 4.4 lb) - Draft / To Confirm against fill weight and bulk density |
| Dimensions (W x H + gusset) | 500 g / 1 kg / 2 kg (17.6 oz / 2.2 lb / 4.4 lb). Draft finished size W x H + bottom gusset (mm): 500 g approx. 180 x 270 + 65; 1 kg approx. 230 x 330 + 75; 2 kg approx. 270 x 390 + 90. Draft rigid spout collar outer diameter approx. 40-55 mm with a graduated screw cap. Draft / To Confirm against cap graduation volume and powder density. |
| Monthly capacity | 300,000-800,000 pcs / month |
Bags are built to your fill weight and bulk density, not to a catalogue number — send us the product and we confirm the structure before tooling.
MOQ & unit pricing
500 pcs (digital print) / 20,000 pcs (gravure)
| 500 pcs | USD 0.841 / pc |
| 1,000 pcs | USD 0.757 / pc |
| 5,000 pcs | USD 0.421 / pc |
| 20,000 pcs | USD 0.315 / pc |
Prices are FOB Dongguan and exclude duties and taxes.
Lead time & payment
| Production lead time | 32-48 days |
| Sample lead time | 15-20 days |
| Payment terms | T/T - 40% deposit, balance before shipment |
Documentation supplied
| Food-contact documentation | Food-contact compliance letter for the PP film and the PP spout fitment - TO REQUEST | Declaration of Compliance covering film, spout, cap, liner and printing ink - TO PREPARE | Migration test report including the spout weld zone and the cap liner - TO REQUEST | Hot-fill or retort validation report if the fill is filled hot - TO PREPARE | Spout seal strength, burst and drop test report at 250 g - TO PREPARE | Tamper-evidence function test and cap torque specification - TO PREPARE | Shelf-life and seal-integrity study for wet fill - TO PREPARE | Converting and filling line GMP certificate (BRCGS, SQF or equivalent) - TO REQUEST | Food-contact declaration for this SKU's closure and fitment components (Wide-mouth spout with a graduated screw-on measuring cap that doubles as a scoop) - TO REQUEST from the component supplier |
| Environmental claim status | CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. SKU note for KP-PF-032: the claim-critical components are the closure and fitment actually used on this build (Wide-mouth spout with a graduated screw-on measuring cap that doubles as a scoop) and the end-of-life route of the pack format of this SKU; both must be covered by the assessments listed before any wording changes. |
About this structure
MeasureCap builds the scoop into the closure. A graduated screw-on cap measures the dose, then screws back onto the spout so it never disappears into the powder. That matters for milk replacer and supplements where an inaccurate scoop affects outcomes and triggers complaints. A rigid spout collar handles the repeated twisting of daily use, and the high-barrier body protects hygroscopic powders from clumping. A digital gradient mesh gives a measured, formulation-forward tone for veterinary-channel products. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-005 - Mono-PP Spout Pouch for Wet Food and Gravy Toppers - on the basis of structure-first match: large-bore welded spout with a screw cap; the graduated measuring cap is a fitment variant and the fill is dry. The family design direction is: Specify a PP film and a PP spout fitment so the pouch body and the only rigid component share one polymer family; keep the ink load low and water-based; avoid aluminium foil and metallised layers that a wet-fill barrier would otherwise invite; and design the pouch so the cap can later be specified as a compatibly sized standard fitment. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. Duties & taxes are not included in quoted prices.
Why brands choose it
- Clean Pour - liquid-format packaging with crisp highlights - applied to the Stand-Up Pouch with Integrated Measuring-Cap Pour Spout format
- Mono-PP Spout Pouch for Wet Food and Gravy Toppers
Frequently asked
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Need this quoted?
Send your fill weight, first-run quantity and target market to kindpackpouch@gmail.com or WhatsApp +86 150 1487 8185. You will get a transparent quote, the MOQ for your structure, and a sample lead time within one business day. Duties and taxes are not included in quoted prices.